Fuel Pressure Test Gauge 0-300 psi with Adapter & 6" X 1/8" Brass "Sludge Pump and Accessories" Always install chemical injectors at

Always install chemical injectors at least 3 to 4 feet away from the unloader to prevent the chemical from back-siphoning into the pump

Switch and solenoid (TT7067) are mounted on a plate and wired to the 12-volt electric motor

When the gun valve re-opens

Angular contact ball bearings stabilizes the crankshaft and one thrust needle bearing absorbs the plunger load and assure long radial plate life

The inner diameter of the PVC pipe should be slightly wider than the outside diameter of the suction hose

Fuel Pressure Test Gauge 0-300 psi with Adapter & 6" X 1/8" Brass "Sludge Pump and Accessories" Always install chemical injectors atFuel pressure test gauge 0 300 psi with adapter & 6" x 1 8" brass nipple SKU: 2422